5P
POLYESTER SINGLE JACKET HOSE
The super-duty 5P is an excellent all-around performer: Strong, flexible and ideally suited for all exterior and interior firefighting applications, it delivers medium pressure and high-end performance at a value price point. 5P is a polyester single jacket hose with a rugged Ethylene Propylene Diene Monomer (EPDM) rubber liner that can handle most fluids including some chemicals and petroleum-based products. It boasts a maximum operating pressure of 225 psi (1550 kPa) and can be enhanced with optional Dura-Cote™ treatment for a higher level of abrasion resistance while preventing water pick-up.
- Tough. A polyester single jacket and EPDM rubber inner liner coating rate this value hose big on performance and dependability.
- Add-on Strength. Optional Dura-Cote™ protective treatment extends the life of the hose, greatly increases abrasion, heat, flame and petrochemical resistance.
- Rugged. Performs at temperature range -40° to 150°F (-40° to 65°C).
- Rated. 1½” and 2½” sizes are UL, ULC and FM approved.
HOSE SIZING AND SPECIFICATION
Size | Service Test | Proof Test | Burst | Weight (For 50′ Coupled) |
Bowl Size | Certification Available |
---|---|---|---|---|---|---|
IN | PSI (kPa) | PSI (kPa) | PSI (kPa) | LBS (KG) | IN | |
1 1/2“ | 250 (1725) | 500 (3450) | 750 (5170) | 8 (3.6) | 1 3/4“ | UL, ULC, FM |
2″ | 250 (1725) | 500 (3450) | 750 (5170) | 14 (6.4) | 2 5/16“ | |
2 1/2“ | 250 (1725) | 500 (3450) | 750 (5170) | 18 (8.2) | 2 13/16“ | UL, ULC, FM |
3″ | 250 (1725) | 500 (3450) | 750 (5170) | 24 (10.9) | 3 3/8“ | |
4″ | 250 (1725) | 500 (3450) | 750 (5170) | 46 (20.8) | 4 9/32“ |
As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used.


HOSE COLORS
- Yellow
- Red
- White (uncoated)
POLYESTER SINGLE JACKET HOSE
HOW TO ORDER
Type | Hose ID | by | Hose Length | Color | Coupling Size | Thread Type | Coupling Material | Options |
---|---|---|---|---|---|---|---|---|
5P | 15 = 1 1/2”
20 = 2″ 25 = 2 1/2” 30 = 3″ 40 = 4″ * |
X | 50 = 50′
100 = 100′ |
Y = Yellow
R = Red W = White |
15 = 1 1/2”
20 = 2″ 25 = 2 1/2” 30 = 3″ 40 = 4″ |
N = NH
I = IPT S = Storz |
Blank = Aluminum
BR = Brass Rocker Lug BP = Brass Pin Lug |
UL = UL LabeledULC = UL Canada LabeledFM = Factory Mutual CR = BS = |
Part No. Example: | ||||||||
5P | 20 | X | 50 | Y | 15 | N | BR |
As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used.